Fall Protection

The Miller Titan Harness has standard rear anchorage 1 point safety harness, webbing chest strap. EN361.

Mini Block certified for Factor 2 anchorage (below the feet), most other similar blocks are only certified for Factor 1 anchorage only (shoulder level or above). Lightweight and durable. Length: 1.8mtr when fully extended. Instantly arrests a free fall with a built in shock absorption system. Twist-lock karabiners and a swivel system preventing life-line twisting. Extra large Scaffold Hook. EN360.

New patent-pending Miller Twin Turbo™ G2 Connector and patented D-Ring Connector easily adapts two (2) lightweight Miller TurboLite™ for continuous 100% tie-off fall protection. Better alternative to double-leg lanyards – Reduces fall clearance requirements for use in more applications. PFLs swivel independently – Provides ultimate worker mobility and prevents webbing from twisting and binding in the unit.

The Miller Inertia reel is an instant locking block, enables 2.5m of movement from the anchorage point, features an integral shock absorber, 2 karbainers and 48mm polyamide webbing. EN360

The Miller Scorpion an an affordable compact and durable product, karabiner on one end with a swivel snap hook on the other, 2.5m teflon coated webbing lifeline, built in shock absorber. EN360.

The Miller Falcon is a lightweight fall arrest block, highly visible fall indicator, high quality steel internal mechanism, lightweight webbing lifeline, double action snap hook. EN360.

The MILLER Kernmantel Rope Restraint Lanyard is designed to keep a person restained in a set position to prevent a fall risk from occuring, karabiner on each end. 2 metre length. Kernmantel is 2 times more resistant to abrasion than a standard rope. EN354.

The MILLER Kernmantel Rope Restraint Lanyard is designed to keep a person restained in a set position to prevent a fall risk from occuring, karabiner on each end. 1.5 metre length. Kernmantel is 2 times more resistant to abrasion than a standard rope. EN354.

The MILLER Kernmantel Rope Restraint Lanyard is designed to keep a person restained in a set position to prevent a fall risk from occuring, karabiner on each end. 1 metre length. Kernmantel is 2 times more resistant to abrasion than a standard rope. EN354.

The 1008288 MILLER Titan Work Positioning Lanyard is ideal for construction and general maintenance. Length 2M. Comes with loop and 2 twist lock karabiners. EN358.

The Miller Titan Lanyard is a 2 Metre rope shock absorbing lanyard complete with a scaffold hook and a karabiner, external shock absorber. EN354 EN355.

The Miller Titan Double Lanyard is a 2 Metre double webbing shock absorbing lanyard complete with a karabiner and two scaffold hooks, gives 100% tie off protection. EN354 EN355.

Miller reinforced anchorage option, steel sling with a loop on each end, protective plastic casing around steel wire, suitable for use around heavy girders, for use with retractable blocks. EN795 (b).

Miller anchorage connector used for securing an intermediate attachment to an anchoroage point, quick release action, EN362.

Miller galvanised connector with keylock, connector is found on most lanyards. EN362.

Comprehensive solution for confined space situations. Height of 2.10 Metres. Self locking, with adjustable rubber feet legs. Complete with one pulley. (Illustrated winch and bracket supplied separately)

The Miller Relief Step is designed to alleviate the symptoms of suspension trauma following a fall, the relief step is fitted to the harness and can be deployed for increased short term safety.

KALYPSO - cable, retractable fall arrester 20 m with integrated rescue winch Wire rope diametre: 4.5 mm Length: 20 mtr Weight: 9.20 kg Breaking strength: > 12 kN Connectors: Swivel and FA 50 101 17 at anchorage end, FA 50 203 20 connector with load indicator at attachment end. Conforms to: EN360:2002, EN1496:2017 class B, ATEX Directive 2014/34/EU. Approved for a user with a max. weight of 140 kg in vertical use. Olympe cable, Casing made up of high impact strength Polymer, to prevent breakage. Comes with Galvanized Steel Wire Rope of diam 4.5 mm. FA 50 225 23B at anchorage end and FA 50 203 20 at attachment end. Integrated recovery system, the device can be adapted on our TRIPOD (FA 60 001 00 or FA 60 002 00) through the Kit FA 60 001 03, as well as on MultiSafeWay (FA 60 022 00) through the plate FA 60 022 04.

ARGO - Rescue and work winch, length 20 mtr, for Tripod, MultiSafeWay & EasySafeWay To be used for raising or lowering of personnel or material into confined spaces. Minimum working load: 60 kg. Safe working load (as per EN1496): 135 kg. Maximum working load (as per Machinery Directive): 250 kg. Length : 20 mtr Galvanized cable diam : 4,8 mm Conforms to: Machinery Directive 2006/42/EC, EN 1496:2017 Class A, EN 13157:2004, ATEX Directive 2014/34/EU. Equipped with bolting fixture for robust fitting on to the Tripod.

VORAS - Retractable fall arrester with webbing lanyard Maxi length : 2.50 mtr Webbing width : 50 mm Breaking strength : > 15 kN Connector : 1 steel snap hook FA 50 202 17 Conforms to : EN360:2002 Incorporates a protective casing and an energy absorber (45 mm) with a steel karabiner FA 50 202 17 as attachment element for harness.

This lanyard is made with polyester webbing and includes an energy absorber, a self locking scaffold hook and carabiner. It is 180cm long including connectors.

Double ended lanyard featuring high quality webbing, hooks, carabiner and shock absorber. It is 180cm long including connectors.

MUNE 3 - Body harness with 1 dorsal D-Ring and 1 sternal D-Ring on sternal strap

OLYMPE - Retractable Fall Arrester with double aluminium casing and 2 webbing lanyards length 2 metres

Work Positioning Kernmantle Rope Lanyard with ring adjuster maximum length 2 mtr with 1 steel screw-locking karabiner and 1 steel snap hook

Great freedom and comfort at work thanks to its Exclusive and innovative harness structure in ‘H’:- Ergonomically placed webbing, horizontal leg straps Quick and easy adjustment: Unique top-down front adjustment, Duraflex stretch webbing, Perfect fit: Adjustable chest strap, Easy connection: very accessible back D-ring due to its bent position, Unique patented sternal D-ring with automatic centering in case of a fall, Better safety thanks to its highly visible stitches & front and back fall indicators, Great durability: protected webbing with a water-repellent and stain-free treatment, 10 year inspection chart & user name label

HOPE - Energy absorbing webbing lanyard length 1.80 mtr with a steel screw-locking karabiner and a steel scaffold hook at the ends.

MUNE 3R - Body harness 2 attachment points with a rescue extension strap Attachment Elements - 1 sternal attachment D-Ring and a dorsal attachment D-Ring for fall arrest, a rescue extension strap with top D-Ring for rescue. Adaptability - Adjustable shoulder and thigh-straps. Convenience - Shoulder and thigh-straps differentiated by a dual colour scheme. Ergonomics - Ideally positioned sit-strap for extended comfort. Compliance - Conforms to EN 361:2002 and EN 1497 : 1996 Can be used by a user with a maximum weight of 140 kg.

7 ft. Tripod maxi For access in confined spaces Adjustable height: from 1.15 m to 2.15 m Wheelbase: from 1.08 m to 1.62 m Weight :14.3 kg Maximum Load Capacity : 500 kg under head / 250 kg on leg Conforms to : EN795:2012 type B, ATEX Directive 2014/34/EU, Machinery Directive, EN 1808 - With two mounted pulleys at the head of the Tripod in the extension of the main leg for passing a cable - Having two auxiliary eye bolts as attachment points. - Aluminum alloy cast head, legs in aluminium. - Steel support-shoes provided with rubber sole to increase friction and impart more stability. - Strength of anchorage point greater than 12 kN - Every Tripod is provided with inbuilt fixture for attaching our winches FA 60 003 20 / FA 60 003 30 / FA 60 023 20 / FA 60 023 20R. - Every Tripod is provided with Tripod Bag

The MILLER H-Design Duraflex 1 Point Harness by Honeywell is the ultimate choice for enhanced safety and flexibility in high-risk environments. Designed for professionals working at heights, this full-body harness combines comfort, durability, and superior protection, ensuring you can focus on the task at hand with confidence.

- Extremely effective, specially designed to help relieve the negative effects of suspension trauma. - Compact and light-weight. Does not hamper the activity of worker while at work. - Allows the suspended worker to stand up in his harness to relieve pressure. - Easy to attach to the harness with the help of the textile loop and velcro provided.

VORAS - Retractable Fall Arrester with polymer casing and webbing lanyard length 2.50 meters and a steel screw-locking karabiner Incorporates a protective casing and an energy absorber (45 mm) with a steel karabiner FA 50 101 17 as attachment element for harness. EN 360:2002.

Restraint Kernmantle Rope Lanyard length 2 mtr with a steel snap hook at one end and a steel scaffold hook at the other end. Made up of 11 mm diam polyamide kernmantle rope. Abrasion resistant thimble to protect the loops from being damaged by metallic contact.​ EN354:2010.

Kit designed to be used on arm elevating working platforms, for scaffoldings and various applications in the construction industry. The kit includes a harness, one single lanyard with energy absorber equipped with connectors.​ EN 361:2002​ EN 355:2002

Harness with belt, light and easy to wear. Dorsal, sternal and lateral attachment points. Adjustment of leg straps and belt​. EN 361:2002​ EN 358:2018

Meets the ANSI/ISEA 121-2018 standard 1000D nylon with water resistant backing Two hook and loop straps secure battery boot to drill battery for safe and easy tethering Nickel-plated cast iron D-Ring 3780S: Maximum safe working capacity: 6lbs // 2.7kg

PREVENT DROPPED HAND TOOLS – Lightweight aluminum carabiner with double action self-locking gate connects to tools to tools like wrenches, grinders, drills, impact drivers, etc. MADE TO TETHER TOOLS – Tether keeps tools weighing 0.5lbs/0.23kg in a retracted state and prevents tools weighing 8lbs/3.6kg from falling on people or objects below. INDUSTRIAL GRADE // MADE FOR INDUSTRY PROS – ABS plastic housing protects the internal components with a cut-resistant Dyneema cord with a durable protected weave to hold up in tough environments LIGHTWEIGHT + LOW PROFILE DESIGN – Weighs less than 0.5lbs / 0.23kg, retractable design limits snags, tangles and tripping hazards

SAFELY TETHER DEVICES & ACCESSORIES - Keep phones, small tools and accessories close by and ready while also preventing costly drops REDUCED SNAGS + TANGLES - Sleek design and 360° rotation of the low-profile lanyard help prevent it from getting caught or tangled on objects QUICK ATTACHMENT - Micro-loop end threads through small captive holes of mini adhesive mounts QUICK EXCHANGE - Micro-loop end with modular buckle easily detaches

TESTED – Meets the ANSI/ISEA 121-2018 standard MAX TETHERING CAPACITY – Tether up to four 3lbs / 1.4kg tools BUCKLE – Modular connecting buckle for exchanging tools EASY APPLICATION – Self-Adhering Tape requires no heat

MEETS ANSI/ISEA 121-2018 - Third party certified to an 40lbs / 18kg maximum working capacity with a multi-drop safety factor ANCHORING STRAP FOR TOOL TETHERING - Affix to railing, scaffolding or other structures to create a closed-ended attachment point for tethering tool lanyards WEAR SLEEVE - Reduces wear and tear by adding a layer of protection against elements and surface abrasion EASY INSTALLATION - Wrap D-ring end around the primary anchor and thread through choke loop

TESTED – Meets ANSI/ISEA 121-2018 standard DURABILITY – 1200D and 600D polyester main material for long life & durability EASY TO USE – Hook and loop straps secure tape measure inside trap for safe and easy tethering TETHER RING – Includes strong zinc-plated cast alloy D-Ring for tethering to tool lanyards

TESTED – Meets ANSI/ISEA 121-2018 standard DURABILITY – 1200D and 600D polyester main material for long life & durability EASY TO USE – Hook and loop straps secure tape measure inside trap for safe and easy tethering TETHER RING – Includes strong zinc-plated cast alloy D-Ring for tethering to tool lanyards

MEETS ANSI/ISEA 121-2018 - Third party certified to an 5lbs // 2.3kg maximum working capacity with a 2:1 safety factor RETROFIT ATTACHMENT POINT FOR TOOL TETHERING - Affix to small hand tools or anchor points to create an attachment point for tethering tool lanyards BUILT TO LAST - Heavy-duty nylon webbing, high tensile strength nylon thread and double stitched web catch for durability in harsh conditions BUCKLE - Modular connecting buckle for exchanging tools

MEETS ANSI/ISEA 121-2018 - Third party certified to an 5lbs // 2.3kg maximum working capacity with a 2:1 safety factor RETROFIT ATTACHMENT POINT FOR TOOL TETHERING - Affix to small hand tools or anchor points to create an attachment point for tethering tool lanyards BUILT TO LAST - Heavy-duty nylon webbing, high tensile strength nylon thread and double stitched web catch for durability in harsh conditions BUCKLE - Modular connecting buckle for exchanging tools

Meets the ANSI/ISEA 121-2018 standard Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering Tool bracket design discretely fastens to open screw port on cordless drills/drivers so you barely notice it’s there Set includes 1 bracket connection point, 6 fasteners with locking washers and 2 product labels

A Single Tripod adjustable to various confined space work situations. It is easy to transport and rapid to install (less than 2 minutes). Features a unique opening/ fixation mechanism placed in the head of the tripod, adjustable, robust leg design. EN 795:2012 CLASS B (CN/TS 16415).

Meets the ANSI/ISEA 121-2018 standard 1000D nylon with water resistant backing Two hook and loop straps secure battery boot to drill battery for safe and easy tethering Nickel-plated cast iron D-Ring 3780L: Maximum safe working capacity: 10lbs // 4.5kg

Meets the ANSI/ISEA 121-2018 standard Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering Patent-pending tool bracket design fastens onto pneumatic/air powered tools using the tool’s air hose coupler Set includes 1 bracket connection point and 1 product label Perfect for a variety of pneumatic tools using an air hose like angle grinders, paddle sanders, handheld buffers, nailers, staplers and rivet guns Fits tools with ¼” couplers Maximum tethering capacity of 5lbs. (2.26kg.)

MEETS ANSI/ISEA 121-2018 – Third party certified to an 10lbs // 4.6kg maximum working capacity with a 2:1 safety factor RETROFIT ATTACHMENT POINT FOR TOOL TETHERING – Affix to hand tools, tool belts, harnesses or structures to create an attachment point for tethering tool lanyards STRETCHABLE LOOP END + ADJUSTABLE BARREL LOCK – Nylon stretch cord threads and cinches around tools or structures DURABLE SWIVELING D-RING – Captive hole for attaching tool lanyards SWIVEL DESIGN – Prevents tool and attachment from getting tangled or bound up LENGTH – 15in // 38cm

MEETS ANSI/ISEA 121-2018 – Third party certified to an 2lbs // 0.9kg maximum working capacity with a 2:1 safety factor RETROFIT ATTACHMENT POINT FOR TOOL TETHERING – Affix to small hand tools or anchor points to create an attachment point for tethering tool lanyards BUILT TO LAST – Heavy-duty nylon webbing, high tensile strength nylon thread and double stitched web catch for durability in harsh conditions DURABLE D-RING – Captive hole for attaching tool lanyards

MEETS ANSI/ISEA 121-2018 – Third party certified to an 2lbs // 0.9kg maximum working capacity with a 2:1 safety factor RETROFIT ATTACHMENT POINT FOR TOOL TETHERING – Affix to small hand tools or anchor points to create an attachment point for tethering tool lanyards BUILT TO LAST – Heavy-duty nylon webbing, high tensile strength nylon thread and double stitched web catch for durability in harsh conditions DURABLE D-RING – Captive hole for attaching tool lanyards

MEETS ANSI/ISEA 121-2018 – Third party certified to an 2lbs // 0.9kg maximum working capacity with a 2:1 safety factor RETROFIT ATTACHMENT POINT FOR TOOL TETHERING – Affix to small hand tools or anchor points to create an attachment point for tethering tool lanyards BUILT TO LAST – Heavy-duty nylon webbing, high tensile strength nylon thread and double stitched web catch for durability in harsh conditions DURABLE D-RING – Captive hole for attaching tool lanyards

MEETS ANSI/ISEA 121-2018 – Third party certified to an 2lbs // 0.9kg maximum working capacity with a 2:1 safety factor RETROFIT ATTACHMENT POINT FOR TOOL TETHERING – Affix to small hand tools or anchor points to create an attachment point for tethering tool lanyards BUILT TO LAST – Heavy-duty nylon webbing, high tensile strength nylon thread and double stitched web catch for durability in harsh conditions DURABLE D-RING – Captive hole for attaching tool lanyards

MEETS ANSI/ISEA 121-2018 – Third party certified to an 2lbs // 0.9kg maximum working capacity with a 2:1 safety factor RETROFIT ATTACHMENT POINT FOR TOOL TETHERING – Affix to small hand tools or anchor points to create an attachment point for tethering tool lanyards BUILT TO LAST – Heavy-duty nylon webbing, high tensile strength nylon thread and double stitched web catch for durability in harsh conditions DURABLE D-RING – Captive hole for attaching tool lanyards

MEETS ANSI/ISEA 121-2018 – Third party certified to an 2lbs // 0.9kg maximum working capacity with a 2:1 safety factor RETROFIT ATTACHMENT POINT FOR TOOL TETHERING – Affix to small hand tools or anchor points to create an attachment point for tethering tool lanyards BUILT TO LAST – Heavy-duty nylon webbing, high tensile strength nylon thread and double stitched web catch for durability in harsh conditions DURABLE D-RING – Captive hole for attaching tool lanyards LENGTH – Short: 3.5in // 9cm, Medium: 4.5in // 11.5cm, Long: 5.5in // 14cm, X-Long: 6.5in // 16.5cm, 2X-Long: 8.5in // 21.5cm

Miller kernmantel single restraint lanyard 2 meters with a steel twist lock karabiner and a GO55 steel scaffold hook.

Fall Arrester, Retractable fall arrest with 50 mm webbing Maximum length 2.5 meters, Incorporating a protective casing and Energy Absorber 45 mm). Minimum breaking strength > 15 kN. EN 360:2002.

Adjustable up to 2 m Made from 14 mm Polyamide 3 strand twisted rope (complying to ISO 1140). EN 358:1999.

This 150 cm lanyard is made from Polyester rope with two carabiners at each end. EN 358:1999, EN 354:2010.

This lanyard is 180 cm in total, including 120 cm rope, tear open energy absorber, snap hook and a scaffold hook. EN 354:2010, EN 362:2004, EN 355:2002.